Chain Breakers
Separate roller chains fast and economically
Our know-how – your advantage
In technical machines and plants roller chains in different lengths come into operation.
Roller chains are mostly sold by the meter, they have to be separated therefore accordingly.
With the Stationary Chain Breaker KT it will be done fast and easily.
Often a long chain is pulled in a machinery during assembly, then it has to be shortened to
the right length. For that the Manual Chain Breakers HK are best practicable.
Roller chains are mostly sold by the meter, they have to be separated therefore accordingly.
With the Stationary Chain Breaker KT it will be done fast and easily.
Often a long chain is pulled in a machinery during assembly, then it has to be shortened to
the right length. For that the Manual Chain Breakers HK are best practicable.
Advantages of Kullick Chain Breakers
| - | Both chain pins of an outer connecting link plate are pressed through in one working operation. |
| - | The time for separating lasts only a few seconds. |
| - | The chain does not twist. So there is no breaking danger for plastic parts of plastic chains. |
| - | Both separated chain parts have at once the right ends with inner connecting link plates. |
| - | Chains with parallel and shouldered pins can be separated with the same pick-up-unit. |
| - | Suitable for roller chains of all materials. |
| - | Very easy to use. |
Range of use
The chain breaker KT is used if roller chains have to be separated stationary fast and efficiently also in big numbers. Through exchange of the pick-up-unit different types and dimensions(8 mm - 1 1/4") can be separated.
Machine manufacturer profit by:
| - | fewer chains in stock and more flexibility |
| - | shorter delivery times for chains sold by the meter |
| - | lower prices for chains sold by the meter |
Chain trader profit by:
| - | better competitive position due to flexible fulfillment of the customers’ wishes |
| - | fast supply of the customers |
| - | higher value added |
Mode of operation
For the different chains the pick-up-unit is exchanged in each case. This takes place in less than 1 minute without tools.For separating the chain is slid on the fork of the pick-up-unit as far as it will go. Turning the hand crank moves the push-out-unit downwards and pushes out both chain pins – the chain is separated.
Chain mounting
The chain breaker KT can also be used for occasionally mounting attachment plates and closing chains.
Video
Stationary Chain Breaker KT (You will be directed to YouTube)Brochures
| Chain Breakers: | German (PDF 0,74 MB) | English (PDF 0,74 MB) |
Range of use
The manual chain breaker is used if a chain has to be separated directly at the machine where space is narrow.The pick-up-unit and the push-out-unit form a unity therefore the manual chain breaker has very compact dimensions. For every chain size a specific manual chain breaker is required.
Deliverable sizes: 3/8" – 1".
Manual chain breakers HK come into operation with:
Machine and plant manufacturers
Maintenance companies
Mode of operation
For separating the chain is slid on the fork of the pick-up-unit as far as it will go. Turning the hand crank moves the push-out-unit downwards and pushes out both chain pins – the chain is separated.
Video
Manual Chain Breakers HK (You will be directed to YouTube)Brochures
| Chain Breakers: | German (PDF 0,74 MB) | English (PDF 0,74 MB) |
Offer/consultation:
Alterations reserved
© Kullick Gerätebau
© Kullick Gerätebau
